Häst Accessories
As we continue to make slings and frames, often we find that a new tool or other piece of gear will really help.
This page is dedicated to those useful items that can make a difference in how easily a rescue can be made successful.

Picket Bar

This bar, with a length of 46 inches and weighing about 15 pounds, is designed to be driven with three 1 inch diameter stakes as shown.  The three sleeves on the bar are set at 30 degrees to allow for an elevated load such as a bipod or tripod.  The clevis has a 10,000 pound WLL and is attached behind the first picket, putting this attachment in compression.  The rest of the bar, made of 6061 aluminum, has a tensile yield of at least 50,000 pounds.

The price on this bar is $186 and can be ordered from:  Häst Order Form


For a complete discussion on this bar, with our reasons for its design,
click on:  Picket Bars and Pickets

 

Swivel

We are offering this swivel as the perfect companion for  use with our tripod and our XXL pulley.  With a 10,000 pound WLL, the ratings match our other equipment.  While this swivel is available from other sources, the one thing we do is replace the screw that holds the safety latch with a rivet.  This prevents the screw from catching on things while preventing the possibility of latch from ever coming loose.

The price on this swivel is currently $178 and can be ordered from:  Häst Order Form


Stake Extender

This was an accessory requested by one of our customers.  The purpose
of the stake extender is to prevent damage to the frame feet by keeping
the striking hammer away from the the frame.  The top is made of
solid 6061 aluminum and it weighs just a bit over 4 pounds.  While
over time, we expect the top driving surface to flatten somewhat, it
would be no different than the steel punches we use day to day.
We designed this to be used with Hogan Double Headed Stakes.

The price on the Stake Extender is $42 and can be ordered
from our:  Häst Order Form under Accessories.


XXL Pulley

To the right is our XXL Pulley.  This pulley works well in conjunction with our bipod
and tripod frames to give a much reduced pull required when lifting large animals or
VERY large animals.  With a continuous becket across the bottom, it can be rigged for
ratios from 2:1 up to 10:1.  The pulley has a 10,000 pound working load rating.

The price on a set of two pulleys is $936 and can be ordered by clicking on:
Häst Order Form under Accessories.

For more detailed information, including the test sheet, click on: XXL Pulley










(picture coming soon)

Thompson Sleeve for Hay Spikes

Measuring 46 inches long, this sleeve is designed to slip over the end
of most hay spikes.  The inside diameter is 3 1/2 inches.  Made of
6061 aluminum, this sleeve can be deployed rapidly for a convenient
lifting point.  The rope should then be secured to prevent the sleeve
from coming off the end of the spike if it is accidently turned downward.

The price on this sleeve is $176 and can be ordered
from our:  Häst Order Form under Accessories.
Thompson Sleeve for Flat Forks

Measuring 46 inches long, this sleeve is designed to slip over the end
of most flat forks.  The inside measures 4 1/2 inches wide and
2 1/2 inches high.  Made of 6061 aluminum, this sleeve can be
deployed rapidly for a convenient lifting point.  The rope should then be
secured to prevent the sleeve from coming off the end of the fork
in the event it is accidently turned downward.

The price on this sleeve is $216 and can be ordered
from our:  Häst Order Form under Accessories.
Return to Home Page

If you have a question, please write us at:  Häst, PSC